Buy Sanus Systems NF 30 Natural Foundations (Black)Sanus Systems NF 30 Natural Foundations (Black) Product Description:
- For Carpet or Tile Floors: These speaker stands come with two different foot options for placement on either carpet or tile floor.
- Wire Management: The unique wire management system lets you hide cables in a safety channel behind the pillar
- Speaker Isolation Options: Sanus's speaker stand comes with two different speaker isolation options,
- Included are four carpet spikes and four screw in polyester feet
- You can use the neoprene pads or the brass studs, whichever one suits your purpose
Product Description
The Sanus NF30B Natural Foundations 30" Speaker Stand offers high performance speaker support with the natural beauty of real hardwood construction. This speaker stand is constructed with acoustically superior 3/4" MDF and comes with both premium and adjustable carpet spikes and polyester feet to ensure a stable grip on any floor surface.The base features beveled edges with a hand rubbed black finish. The unique wire management system keeps your cables out of the way. Use the speaker isolation speaker studs to provide a stable, non-slip surface for your speaker.
Customer Reviews
Most helpful customer reviews
10 of 10 people found the following review helpful.
Way better than expected!
By C. Popa
I had been looking for some good speaker stands for my Polk Audio Tsi 200's and couldn't find many stands that were strong enough to support them. I decided to get this set but I had no idea how amazing they would actually be. The stand itself is a matte black and very sturdy on carpet(comes with spikes). The packaging was completely destroyed by the time it reached me, but I wasn't missing any parts. I used a drill to help with the assembly and it took about 10-15 minutes to get them all set up. I strongly recommend using some quakehold museum wax to keep the speakers firmly attached to these stands. Overall, an attractive,strong, set that exceeded all expectations.
9 of 9 people found the following review helpful.
Solid mid range speaker stands
By Walter Heckman
I was very pleased with this product. The purchase comes with two stands. The stands were easy to assemble. The stands are pressboard wood. They are solid and the paint on them hasn't chipped or flaked, except for one place...read on to find out. I have fairly large speakers and the stands support them well.The only thing I didn't like very much was the way the wire cover was implemented on the back of the stand. You get two pieces of flat, semi-flexible plastic that you insert into two slots cut on the back of the stand. You have to bend the plastic into a half pipe and then slide them down the base of the stand while keeping the plastic half pipe in the slot. It took a couple of tries to get the plastic pieces to bend and then slide into the slots that retain them. I nicked the top of the wood at the top and it chipped a bit of the paint off. However, once I figured it out and got them in it looks pretty good.Effective and attractive.
8 of 8 people found the following review helpful.Very good quality for the price
By Jack H Hoffman III
Overall, these stands are very decent quality, especially given the $50 price I paid (not including shipping). With the option of spikes or pads for the top and bottom plates, it gives you options for all types of speakers and locations. I'm using the carpet spikes on the bottom and neoprene pads on top with my Yamaha NS-333's which are being used for satellite duty. These speakers are on the heavy side (>12lbs) so traditional smaller satellite stands will not work. While not rock-solid stable, these stands work well enough for my "out-of-the-way" corner locations. They can take a light bump, but wouldn't hold up to a small child grabbing hold and yanking (or an overly excited labrador). With my older carpet and padding, the stands sit up on the spikes quite a bit, even at the lowest settings. They are however adjustable, so if anyone complaints about the overall height on carpet, please try adjusting your spikes (or replacing your carpet).In case anyone was still wondering, there are two stands in the package. I received all parts listed in the instructions, though the blister pack that contained them had been opened and resealed with tape. Most likely there was an early quality control issue with parts being left out and this was corrected in the factory before being shipped to distributors.The instructions are useless as it consists only of illustrations with no written instructions, but this is not rocket science. The screws all fit without splitting or excessive effort, which might have been another factory correction as I've heard other complain of splitting smaller holes. As others have stated, the most difficult part is installing the wire channel. The illustrations indicate bending the "film" for the channel and inserting both sides into the slits in the back of the stand. This is impossible, but there is an obvious that the way it needs to be done. Simply, leave the top unattached and slide the bottom edge of the film into the channel from the top and move it down slowly. I took my time and bent the film into the approximate shape and slid it down about 2-3", then I used one palm to keep pressure on the already inserted part (to keep it in the track) while using my other hand to squeeze and slide the rest of the film in 1-2" movements. I did not have any issues using this technique and highly recommend using pressure on the already inserted piece, because the finish on the back could be damaged if the film were to slip out. The pieces of film get very hard to install at the end, so I used a flat piece of wood to push it down the rest of the way. NOTE: there are two pieces of each size of film, and you need to use one of each size per stand. Total install time for both stands: 20-30 minutes.The neoprene pieces are small and should really be a little thicker to allow the speakers to sit up a little more for use with thicker speaker wire, but this is not a major concern.I have oily palms and I noticed that the finish on these stands show those oils, however some furniture polish should help give the stands a little more luster to reduce that effect.Given the options with these stands, I'd say it's an excellent value and well worth the extra time for installation. However, if your local UPS people are less than delicate with stuff, beware the packaging!
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
