Affordable Dale Adams Enterprises 7031 The Bone Rough Rider Mechanic's Creeper

Buy Dale Adams Enterprises 7031 The Bone Rough Rider Mechanic's Creeper

Dale Adams Enterprises 7031 The Bone Rough Rider Mechanic's Creeper Product Description:

• Heavy duty 5" diameter wheels, 1-3/4" ground clearance
• 1-3/8" wide floatation type tread doesn't sink into soft surfaces
• 2-1/2" swivel bearing compared to 1-1/4" on conventional creepers
• Tough injected molded polymer body
• Made in the USA

Product Description

The Bone Rough Rider creeper is perfect for heavy duty, outdoor use - trucks, farms, motor homes and more. This off-road creeper provides unmatched mobility on rough terrain. One-piece molded body with large, extra wide 5 3/8in. dia. wheels will not sink into soft ground. Rolls easily over gravel, dirt or broken pavement that would stop ordinary creepers in their tracks. Offers 2 7/8in. ground clearance and a 400-lb. capacity. Perfect for big outdoor jobs and big guys! U.S.A. Capacity (lbs.): 400, Material: Polypropylene copolymer, Ground Clearance (in.): 2 7/8, Dimensions L x W x H (in.): 47 x 25 1/2 x 7 1/2, Wheel Diameter (in.): 5 3/8, Wheel Thickness (in.): 1 5/16

Customer Reviews

Most helpful customer reviews

23 of 25 people found the following review helpful.
Excellent USA product, Korean casters not up to snuff
By Greg Meboe
I use this for outdoor automotive work and foundation repair under my house. The black body is stiff and strong, quite comfortable too. It is an excellent design. My only complaint is that the casters bring down the overall performance of the creeper. The ads say, "Wide, flotation-type tread," but these solid tires don't have any tread at all. The are hard plastic, and mostly flat. As a result they don't "float" over surface irregularities like a rounded pneumatic or low-density tire would. On pavement, the creeper gets hung up on air hoses, tools, etc. because of the rigid tires. On dirt, the creeper tends to sink into the ground, again because of the rigid tires. I weigh 160 lbs.I may end up buying a better set of casters, but for [the money] I expected a top-notch product right out of the box. This is probably the best creeper for outdoor work, but it would be unstoppable if Pegasus had selected better casters.

11 of 11 people found the following review helpful.
Ride any surface creeper
By Juan P. Mejia
This creeper is excellent in durability, and function when it comes to outside work, I am a Diesel Technician, I usually work outside in all kinds of enviroments, this is the only creeper that gets around in rough suraces anything else you are better off with a piece of cardboard. This is my second one I owned, my first lasted my three years until someone ran it over with a forklift.However there is a trade off, it is not the most comfortable creeper. As the entire surface is hard plastic and not ergonomic is tough on the body anly one small paded section for your head, and is not enough padding.If you constantly working in a rough area this is the tool for you.

9 of 9 people found the following review helpful.
Rough ride made easy
By MD Smith
I purchased two of the Bone Rough Riders to use on rough surfaceand often over materials that fall out of construction andforestry equipment. This is the best creeper I have found.Today I watched a mechanic roll over a 1 1/4 combination wrenchand didn't have a wheel hang up, really amzing.

See all 38 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discount Wobble Light WL500H Self-Righting 500-Watt Halogen Work Light

Buy Wobble Light WL500H Self-Righting 500-Watt Halogen Work Light

Wobble Light WL500H Self-Righting 500-Watt Halogen Work Light Product Description:

• Self-Righting work light; knock it over, it bounces back.
• Floating shock system protects bulb
• Fan Cooled and ventilated, will not burn
• Tough Polycarbonate dome and durable polymer housing
• No set-up required and can string several together

Product Description

Bright, durable and virtually indestructible, the 36in. tall Wobblelight is a tough, self-righting worklight that withstands severe abuse from workers, vehicles, debris and from being dropped. 500 Watt halogen light is great for remodeling, small rooms and and small outdoor areas. Shock absorber protects bulb from strikes and jarring. Internal ventilation system keeps light cool enough to touch. No setup - just plug it in. 36in.H x 18in. diameter. Can be used individually or strung in series. U.S.A. Bulb Type: Halogen, Lighting Diameter Range: 16 to 24 ft., Bulbs (qty.): 1, Watts: 500, Dimensions O.D. x H (in.): 18 x 36, Light Output (Lumens): 8,000

Customer Reviews

Most helpful customer reviews

7 of 7 people found the following review helpful.
Never buy another one.
By A Customer
Bought several of these light a couple years ago and they STILL WORK!!! Unlike regular tripods which break and need constant bulb replacement, these things last. The one time cost will more than pay for the 10 tripod lights you would need to replace over the length of any project. Not only the replacement cost but the cost to replace the bulbs or fix regular tripods make this light a great deal. I highly recommend trying one and am sure you will want more.

6 of 6 people found the following review helpful.
Wobble light on job site
By Bill Mintz
I have used one of these for about one year. The unit does everyting that it claims to. The bulb is almost indestructiable. I have knocked, dropped it, and generallt abused it. I have changed the bulb (propriteray only) once. I love the light it gives, the recations are excelletnt.( Is that a bouy?) The only drawbacks anre that it is a bit hard to carrry, and store as it is a bit bulky. Otherwise I love it.

5 of 5 people found the following review helpful.
Durable and Efficient
By Ronald J. Nelson
This light works great in a real work environment. The plumbers and electricians drag it arround with them on the job. It gets bumped, hit, tipped over and etc. It works great, especially in an area where the light can be reflected off of the light colored interior surfaces. As a stand alone light in an area with dark surfaces it does not work as well as other work lights.

See all 9 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale Robert Larson Company 560-3250 Miter Clamp

Buy Robert Larson Company 560-3250 Miter Clamp

Robert Larson Company 560-3250 Miter Clamp Product Description:

• Original German Made Mitre Clamps
• Includes 8 each of the 6 sizes of rings and application tool
• Comes in beautiful beechwood box so you won't lose any parts
• Strong, well made rings won't lose their shape
• A must for fitting mouldings, picture framing and any finished carpenter

Customer Reviews

Most helpful customer reviews

22 of 23 people found the following review helpful.
A MUST
By Philip mc Callion
Since I purchased a set of Miter Clamps I have never looked back. They are an absolute must for any body doing base board, crown moulding shoe moulding etc. They are perfect for finished work, just glue and clamp no nails necessary. I have recommended Miter Clamps to anybody I know in the same scope of work as me. From my recommendations to the rest of the people in my company several have purchased the clamps and have found them a hugh success. There are other brands on the market, but trust me "Ulmia 560-3250 miter Clamp" are the best!

4 of 4 people found the following review helpful.
invaluable clamps
By Joseph Weitkamp
The clamps are great for gluing miters. Ulmia also offers a finger style clamp which is great for smaller tasks and requires no spreader. To the reviewer that was so upset about the points. In the past if I have to clamp something that I don't want holes in I use a sacrificial skin (door skin or MDF) on the clamping surface. I have used them for years and couldn't imagine not having them.

2 of 2 people found the following review helpful.
Great for trim work
By Jeffrey W. Smith
Nice for large trim jobs and crown returns, and if you angle the clip with the grain you can swell the dents out of bright work.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons Reechcraft 40003 Bronco Sawhorse with 4-Inch to 68-Inch Plank Height, Single

Buy Reechcraft 40003 Bronco Sawhorse with 4-Inch to 68-Inch Plank Height, Single

Reechcraft 40003 Bronco Sawhorse with 4-Inch to 68-Inch Plank Height, Single Product Description:

• Can level a pair of Bronco's from 4" to 68" on any type of ground condition or contour
• Folds flat for easy transport and holds 600lbs per pair
• Non-skid working surface on each horizontal support member
• Over 30" of adjustment travel per leg
• *Sawhorses sold individually

Customer Reviews

Most helpful customer reviews

14 of 14 people found the following review helpful.
Sawhorse is misleading
By J. Stegall
Calling this a sawhorse is misleading I think. I delayed buying a set because the price and sawhorse did not go together. These are more like staging. They do an excellent job of supporting both ends of my 12' walkboard and they really shine on uneven ground and as mentioned before, repairing/replacing above roof line siding (the job I bought them for). Custom building a sawhorse to match the roof was an option but manuveuring it around was not an exciting prospect. This does the job and is plenty strong.

11 of 11 people found the following review helpful.
Ultimate sawhorse! You must get them if you can afford them!
By Sparky
Cut & dried, these puppies ROCK!! They'll NEVER wobble on the ground, and are EXCELLENT as staging, as they claim to be. They are SUPER STRONG, and will NOT leave you hoping that they won't collapse. (They are NOT like the picture shows them, the connecting arm to the third leg has obviously been improved since they were first invented, and the frame is NOT square tubing as shown, but round. The adjustments of ALL LEGS is in 1.5" increments, not just one leg). I built a 16' gazebo with them, and used them ON TOP OF SCAFFOLDING PLANKING to reach the top of the roof to complete the shingling, and to affix the cupola. Using ratchet-strapping to hold them down, to insure that they wouldn't budge, I planked from these to the 6/12 pitch roof, in a level fashion. I was ecstatic with the performance of these things. If you can afford them, and have a need for these, then DON'T PASS THEM BY! My personal safety is important enough to me to not skimp on, and these allowed me to do a challenging job safely.

8 of 8 people found the following review helpful.
Everything It Says It Is!
By David
I'll have to admit, I was skeptical. I was considering renting a cherry picker to repair and paint the eave and facia of my house. The entire length of the front is above the roof line with a 6/12 pitch and midlevel dimensional shingles. At $240/day, I knew I would need it for at least two days. When I ran across the Bronco sawhorses, they looked like the trick. I also bought a Werner 7' aluminum walkboard. These things really work!! I started out by lashing them together and then to the house. After relocating them the second time as I worked my way down the length of the house, it was apparent that they were not going to slip. The only improvement I could add, was to number the adjustment holes with a sharpie to make mirror image set-ups quicker. They are so simple to set up and use, they come with only a single page of instructions. They come from a company called Reechcraft located in Fargo, ND... that's right! MADE IN U.S.A.! This is truly an innovative product that I am sure I will find many uses for in the years to come.

See all 20 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Reviews Wagner Power Products 9140S 1/2 HP Twin Stroke Piston Pump Paint Sprayer

Buy Wagner Power Products 9140S 1/2 HP Twin Stroke Piston Pump Paint Sprayer

Wagner Power Products 9140S 1/2 HP Twin Stroke Piston Pump Paint Sprayer Product Description:

• Piston pump power paint sprayer for indoor/outdoor latex, oil-based, stain, varnish
• Sprays .23 gallons per minute with 2,800 maximum psi for large to extra-large siding, fence, metal, and stucco paint jobs
• 3/8-horsepower with metal spray gun; runs off household current; replaceable, reversible spray tip
• Includes replaceable and reversible .15-inch spray tip, full-size filter, suction set for 1- and 5- gallon cans, 25-foot hose
• Weighs 26 pounds

Customer Reviews

Most helpful customer reviews

58 of 58 people found the following review helpful.
A good tool for the money!
By C. Morton
This is the first airless sprayer I've ever used, and I have been very impressed with it. I am using it to paint the exterior of my house and it is proving to be a huge time-saver. Tricky areas like the eaves under the roof would have taken forever with a brush. With this tool I'm done in minutes, and it looks great! Even though this is the entry level model in the Wagner line, it still can throw a lot of paint on in a hurry! I can only imagine what the big models will do. I am spraying a latex exterior house paint straight out of the can, no additives or dilution required.The unit came with a 415 tip which was fine for large areas, but proved a little wide for the detail work. I bought a 313 to do the trim. Fortunately all of the brands (Wagner, SprayTech, Grayco, etc.) use the same tips which can be found at any big-box store (Home Depot, Lowes). You will also need to buy a swivel for the gun (about $20). The paint hose becomes very stiff under pressure, and without a swivel, the gun is very hard to maneuver.Cleanup can be a chore. The capacity of the pickup tube and the hose is substantial and all of that paint has to be thoroughly flushed out. Then you have to clean the gun with a brush. None of this is really unexpected. It's a professional style tool for big jobs, and even with the cleanup, you're way ahead of the game.As for the other reviewers who complained about a broken tip, I'm not sure how that could happen as it's made from steel. Maybe they were talking about the tip holder? Just buy a new one from HD for $15 and get on with it.

39 of 40 people found the following review helpful.
Wonderful time saver for large projects
By Martin Wilson
I primed and painted four new rooms and trim using flat acrylic paint. The 1st setup and clean up each took about 30 minutes but subsequent setups and cleanups took 10 minutes. The consistency is wonderful but a quick light pass with a roller is recommend to even out the paint dispersement and user error. It took me a hour to prime four rooms and two hours to paint two coats of flat paint. Overall, I estimated a 75% time savings. Highly recommended. An earlier reviewer had mentioned a broken tip, this package comes with an extra tip and is easy to replace (1 minute)

21 of 21 people found the following review helpful.
Great sprayer paint frenzy
By Jakey
This paint sprayer saved a lot of time more importantly it allowed an ammateur painter do quality work on his new home. I had to read directions carefully and then look at the directions on manufacturers website in order to get accustomed to operating and cleaning sprayer. I originally bought it to stain my deck which it made the job from impossible to a matter of a few hours (stripping included). It was well worth the money and i wish i had bought one 20 years ago.

See all 13 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

For Sale MK Diamond 158252 MK-145 1/2-Horsepower 4-1/2-Inch Wet Tile Saw

Buy MK Diamond 158252 MK-145 1/2-Horsepower 4-1/2-Inch Wet Tile Saw

MK Diamond 158252 MK-145 1/2-Horsepower 4-1/2-Inch Wet Tile Saw Product Description:

• Powerful 115-voly, 4-amp direct drive motor is rated at 1/2-horsepower
• Capable of cutting 45-degree and 22-1/2-degree miters
• Runs off of standard household current
• Includes 4-1/2-inch tile blade
• Lightweight at 11-pounds with a compact and versatile design

Product Description

2580-1002 Features: -Saw is designed for small jobs, but delivers results a professional would expect.-Made specifically for the do-it-yourselfer.-Lightweight compact saw has everything needed to cut kitchen, bath, and floor tile.-Built-in miter table allows for the cutting of precision 22 and 45 miter corners.-Work space safe with the MK-Safeswitch.-Will cut tiles up to 1'' thick.-Compact, easy to store.-Built-in cord storage. Includes: -Includes a table stop to prevent saw from moving on work surface. Specifications: -High torque 1/2 hp, 4 amp, 5500 rpm, 115V-230V motor.

Customer Reviews

Most helpful customer reviews

94 of 95 people found the following review helpful.
Great little saw!
By Thomas Zachary
This is a great little tile saw! It's easily worth twice the money. I bought it for a project that involved cutting 13 x 13 tiles for a fireplace. As long as you take your time, keep the water reservoir full and feed the tile slowly you should get good cuts. I've already made at least 200 cuts on large tile and the blade is still cutting like it did out of the box.

I really like the design; it's just like a little table saw. I have a lot of experience cutting wood on all kinds of machines but have never cut tile in my life. Inside of 5 minutes I was making all kinds of cuts with great results. I really like the ability to cut 45 and 22-degree angles by just tilting up the table face near the blade.

The only thing that I would change on this saw would be to make it out of metal instead of plastic. Then, of course you would probably have to pay 2 to 3 times as much for it. This is not necessarily a criticism, just an observation.

Once you start using the saw and you get tile fragments on the top of the cutting area, it's difficult to move the cutting guide because it jams on the cut tile particles. You just have to remember to stop and clean the table off with a brush and some water every time you want to move the guide. Cutting tile with this saw is very messy. The blade is water-cooled and even though it has a splashguard that covers the blade, water and tile particles dribble off the saw and on to the floor. I had my kitchen tile done by professionals and the $1000 machine that they used made just as much of a mess, I guess that just comes with the job of cutting tile.

Like I've said before, I've worked with a lot of different tools and this little saw is a winner.

50 of 51 people found the following review helpful.
Not for big jobs
By A Customer
I started using the saw making repetitive cuts and I thought the saw was great. It did a fine job. The little saw cut quick and clean with no problems.

I proceeded to cut pieces for trim work and the fun begin. Every tile was a different size and I had about 400 to do. It took me forever to do 40 because I spent a lot of time adjusting the rip fence. It is a pain after the table surface gets dirty.

Bottom line: my job was too large for this saw. I went out the next day and bought a more expensive saw with a sliding table and a bigger reservoir. I finished the rest of the tile in about 5 hrs. If you need a saw for repetitive cuts or for a handful of tile different sizes and you're on a budget then this is your saw.

39 of 40 people found the following review helpful.
A great deal for the price!!
By Mathew S. Nelson
I own a small home improvement/remodeling company, on occasion I will need to cut a few tiles but have no use for a large saw. (I call a tile sub in for large projects). I have made probably 600 cuts so far with this saw and it has worked like a champ and payed for itself with the first use. It's a bit on the loud side and will spray water at you if you over-fill the reservoir. It has plenty of power though, and the fence works just fine if it's lined up properly. Cleanup is made easy by spraying it outside with a garden hose. It is light, portable and will suit the average person that needs to cut a few tiles just fine. The bottom line...if you intend to do some small tiling projects around the home such as a bathroom, kitchen or entryway then this will easily do the job, if your going to be laying 1000 sq ft of tile with lots of cuts then durability might be an issue!! Buy the proper tool for the job at hand.

See all 73 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Comparisons MK Diamond 158189 MK-100 1-1/2-Horsepower 10-inch Wet Tile Saw

Buy MK Diamond 158189 MK-100 1-1/2-Horsepower 10-inch Wet Tile Saw

MK Diamond 158189 MK-100 1-1/2-Horsepower 10-inch Wet Tile Saw Product Description:

• Powerful 115-volt, 1-1/2-horsepower GE motor
• Features a shaft lock for safe, easy blade changes
• Cutting depth capacity of 3-1/4-inches
• Can rip cut a full 18-inch tile while diagonally cutting a 12-inch tile
• Water pump and 10-inch tile blade-included; 1-year limited warranty

Product Description

MK Diamond Products MK-100 is a professional grade, wet cutting tile saw with a fully enclosed, fan-cooled, high torque 1-1/2 horsepower motor. The MK-100 rips 20-inch tile, diagonally cuts 14-inch tile, has a 3-3/4 inch depth of cut and a 10 inch blade capacity. Manufactured with a heavy duty, zinc-plated, one-piece steel frame assembly, cast-aluminum support components, and many other unique features, the MK-100 provides unrivaled quality, performance, and value. The MK-100 comes complete with a 10-inch MK-100 diamond blade, fully submersible electric water pump and adjustable rip guide. Comes with a 10-inch MK-100 diamond blade. One-year limited warranty. Made in USA.

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
MK Diamond MK-100 tile saw
By John F. Riley
You would think that MK Diamond would have the table alignment down pat by now, but they don't. We couldn't even get the center grove in the table lined up with the saw blade while keeping the back of the table at a 90 deg. to the saw blade. Table bearings are very poor quality, won't hold lubrication for more than 10 minutes making it very hard to push table when sawing tile. The 45 Deg cutting attachment that comes with the saw is useless because of its ill fit on the table. Forget this saw spend a little more money and go buy yourself a DeWalt tile saw even if it's a refurbished one. I am very dissatisfied with this saw.

4 of 4 people found the following review helpful.
Good saw for the money only if the motor works.
By Ronald R. Gill
For $600.00 it is a good quality saw if the motor works. Unfortunately after the seventh project in a year and a half, the motor quit. I just got word that a replacement will cost me $425.00. The repair will be $250 to $300 if the parts can be located. The problem with the repair is that all the parts necessary are not readily available.Don't waste your money on the Hot Dog blade if you are cutting large pieces. It is too thin and has a mind of its own. Your cuts will not be straight.

35 of 49 people found the following review helpful.
5 Star's Plus !
By Gary W. Case
Bought this saw last Fall........ Built to last a lifetime! Very Heavy Duty. The work going into the design of this unit is second to none........May cost an weight a little More than the 3/4 horse power units, BUT this Unit has Power to spare, no worry about burning up the motor, and with all the extra's, .......A GREAT Value! This tool will be around for your childrens children to use........ Buy One you will not be sorry.......except for others wanting to use it over the weekend.......HA HA HA.......! No second guessing on this unit....Stores away very easy......

See all 14 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!