Buy Canon USA BP-512 Directional Stereo Mic DM 50 for Camcorders with Advanced Access Shoe

Canon USA BP-512 Directional Stereo Mic DM 50 for Camcorders with Advanced Access ShoeBuy Canon USA BP-512 Directional Stereo Mic DM 50 for Camcorders with Advanced Access Shoe

Canon USA BP-512 Directional Stereo Mic DM 50 for Camcorders with Advanced Access Shoe Product Description:



  • Directional stereo microphone
  • Fits onto Canon camcorders equipped with advanced accessory shoe

Product Description


Get near-professional quality sound for your movies and more with this DM-50 Directional Stereo Microphone that connects to the Advanced Accessory Shoe. Select from pure shotgun or shotgun + surrounding sound modes.

Customer Reviews

Most helpful customer reviews

228 of 229 people found the following review helpful.
3Decent and flexible. Not great.
By G. Katsoulis
The build quality is better than expected. It feels solid in your hand and well put together. The DM-50 fits well onto the camera and is nicely balanced. It runs a little less than the length of the camera, so it does not overwhelm the camera's profile. This is not a big issue, but it does mean the microphone should not get in your way under normal shooting conditions.The microphone itself has some play, presumably to cushion it from camera noise. If so, it does not do a perfect job - more on this below.To discuss the audio quality, I have to discuss the three modes, "Shotgun", "Stereo 1" and "Stereo 2"."Shotgun" mode captures audio primarily from directly in front of the camera. While I have done no scientific tests I would guess it's main balance is at about 35 or so degrees. This mode captures sound in mono from a single element at the front of the unit. In this mode the audio quality is not great. There is little low-end response and the quality and the sound has, for lack of a better term, a slightly plastic quality to it. It is surprising when compared to the sound recorded from the side elements, which seem warmer and more dynamic."Stereo 1" mode seems to capture sound at about 90 degrees, combining both the front element and two separate elements along the side. The overall perceived quality of the sound is much better than using the shotgun alone. There is more warmth and richness in this mode, and it provides a nice balance of front centered sound, with some ambience from the sides."Stereo 2" mode captures sound at more than 180 degrees. The rear facing element seems to be designed to capture nearby sounds, but not more distant sounds. This could only be my perception, but if not, it seems like a nice way to allow commentary from the camera operator. However, the "Stereo 2" seems to be a little too weighted towards capturing sound from the sides at some expense to the front element. As a result, the sound quality itself is a little better, but the mix appears slightly off.In all three modes, the isolation of sound it not perfect. Because the provided documentation says almost nothing about how the DM50 is designed, it is difficult to know how many elements are present and in what combination they are recording sound in each mode. It seems that even in "Shotgun Mode" the left and right front elements are still slightly present, but mixed in mono with the front facing mic.In terms of eliminating motor noise, the DM50 does a better job than the on-board microphone, but the sounds of the motor and any manipulation of the controls are still present. In "Stereo 2" mode, the motor noise is cut in half from what you hear from the on-board microphones. In "Stereo 1" mode the noise is down to about a quarter and in "Shotgun" I would estimate it is about an eighth.With the Canon HV20, the most common sound issue I find is with clicking the function button while shooting to gain control over exposure (usually a three click process). The DM50 does not eliminate this sound. In "Shotgun" mode the DM50 does the best job of reducing the problem, but even with the rubber rings in which the microphone rests, some of that sound it transfered up the camera.The DM-50 promises "near professional" quality sound and that is what it provides. For professional sound you will need to find a more dedicated microphone, such as the VideoMic or Stereo VideoMic, or perhaps both if you wish to have coverage for the same theoretical range as the DM-50. However, the DM-50 provides excellent flexibility that it's competitors do not, so you should consider what your shooting needs are. The DM-50 also does not use batteries, but draws power from the Camera's battery. This can be either an advantage or a disadvantage depending your preference, but it is something to keep in mind when purchasing.The DM-50 is best suited to users who want a single, trouble free microphone that can carry them through a variety of situations. In "Stereo 1" mode, the microphone is at it's best, providing a good balanced sound, though I wish sound from all around the microphone were captured in even quality. This disparity is perhaps the biggest problem with the microphone.

110 of 110 people found the following review helpful.
4Perfect All Around Mike For Everyday Use
By Stephen W. Worth
I recently bought a Canon HV30, and after reading the reviews, I determined that I would need some sort of external mike. It's too easy to pick up the sound of jiggling controls with the lightweight plastic housing on Canon camcorders. I had trouble picking a mike from the various candidates at first, but after doing a little research, I realized that the Canon DM-50 is the best choice. Here's why...First and foremost, this mike doesn't add much size to the camcorder itself. The other mikes I looked at were as big or bigger than the camera. With a camera like the HV30, size is important. If you put a giant furry mike on top of it, you'll never get away with casual shooting in a public place. Everyone will see your camera from a mile away and either hide or mug for the camera. I like to keep my camera tucked in a big pocket in my jacket, so I can pull it out to shoot inconspicuously. This is the only mike that comes close to allowing me to do that.Secondly, one type of mike doesn't cut it for all purposes. For dialogue, you need a mono shotgun. For ambient sound, you need a stereo wide dispersion mike. It makes no sense at all to get a mike that only serves one purpose. You just need to carry two mikes around with you and switch all the time. The Canon DM50 does either or both with a simple flick of a switch.Thirdly, this mike is self powered. No need for an additional battery. This mike puts very minimal drain on the camera's battery. That is much better than carrying around the added weight of a bunch of AAs or a 9 volt.When I got this mike, I did some tests, shooting in difficult situations... I shot music at a loud piano bar, ambient sounds at a quiet coffee house, and dialogue above the clatter of dishes at a busy restaurant. The Canon DM50 performed well under all of these conditions. There isn't a terrific amount of bass in this mike, but that is to be expected for a microphone of this type. It's enough, however, to put across music well without sounding too tinny. I experienced no camera noise in any of my tests. This mike does the job.If I was a pro shooting movies for theaters, I'd want a really good mike on a boom. But I'm not a pro, and the Canon HV30, good as it is, isn't a pro camera. I'm shooting off the cuff vacation movies and documenting panel discussions for my work. This mike is perfect for that. No need to hesitate to get this mike if you can afford it. It's all you need.

22 of 24 people found the following review helpful.
5Works for me
By Bakari Chavanu
I've been using this directional mic for almost three years and have never noticed camera noise. It's compact and provides a good reach for most ambient sound situations.

See all 44 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Canon USA BP-512 Directional Stereo Mic DM 50 for Camcorders with Advanced Access Shoe