Buy Reechcraft 40003 Bronco Sawhorse with 4-Inch to 68-Inch Plank Height, SingleReechcraft 40003 Bronco Sawhorse with 4-Inch to 68-Inch Plank Height, Single Product Description:
- Can level a pair of Bronco's from 4" to 68" on any type of ground condition or contour
- Folds flat for easy transport and holds 600lbs per pair
- Non-skid working surface on each horizontal support member
- Over 30" of adjustment travel per leg
- *Sawhorses sold individually
Customer Reviews
Most helpful customer reviews
14 of 14 people found the following review helpful.
Sawhorse is misleading
By J. Stegall
Calling this a sawhorse is misleading I think. I delayed buying a set because the price and sawhorse did not go together. These are more like staging. They do an excellent job of supporting both ends of my 12' walkboard and they really shine on uneven ground and as mentioned before, repairing/replacing above roof line siding (the job I bought them for). Custom building a sawhorse to match the roof was an option but manuveuring it around was not an exciting prospect. This does the job and is plenty strong.
11 of 11 people found the following review helpful.Ultimate sawhorse! You must get them if you can afford them!
By Sparky
Cut & dried, these puppies ROCK!! They'll NEVER wobble on the ground, and are EXCELLENT as staging, as they claim to be. They are SUPER STRONG, and will NOT leave you hoping that they won't collapse. (They are NOT like the picture shows them, the connecting arm to the third leg has obviously been improved since they were first invented, and the frame is NOT square tubing as shown, but round. The adjustments of ALL LEGS is in 1.5" increments, not just one leg). I built a 16' gazebo with them, and used them ON TOP OF SCAFFOLDING PLANKING to reach the top of the roof to complete the shingling, and to affix the cupola. Using ratchet-strapping to hold them down, to insure that they wouldn't budge, I planked from these to the 6/12 pitch roof, in a level fashion. I was ecstatic with the performance of these things. If you can afford them, and have a need for these, then DON'T PASS THEM BY! My personal safety is important enough to me to not skimp on, and these allowed me to do a challenging job safely.
8 of 8 people found the following review helpful.Everything It Says It Is!
By David
I'll have to admit, I was skeptical. I was considering renting a cherry picker to repair and paint the eave and facia of my house. The entire length of the front is above the roof line with a 6/12 pitch and midlevel dimensional shingles. At $240/day, I knew I would need it for at least two days. When I ran across the Bronco sawhorses, they looked like the trick. I also bought a Werner 7' aluminum walkboard. These things really work!! I started out by lashing them together and then to the house. After relocating them the second time as I worked my way down the length of the house, it was apparent that they were not going to slip. The only improvement I could add, was to number the adjustment holes with a sharpie to make mirror image set-ups quicker. They are so simple to set up and use, they come with only a single page of instructions. They come from a company called Reechcraft located in Fargo, ND... that's right! MADE IN U.S.A.! This is truly an innovative product that I am sure I will find many uses for in the years to come.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
