For Sale Fein PB350 Electric Floor Brush

Buy Fein PB350 Electric Floor Brush

Fein PB350 Electric Floor Brush Product Description:

• Powered beater brush for Fein vacuums
• Plugs right into Fein Vacuums
• 13" cleaning width
• Dual agitator rotates at 1600 beats per minute
• Includes air reduction handle, two metal extension tubes, cord clips, and a 22' power cord

Product Description

Includes Electric Floor Brush - PB350, Air Reduction Handle, (2) Metal Extension Tubes, Cord Clips

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
From woodworking shop to the living room
By BobSRF
When my wife's vacuum broke down, we pulled the Fein Turbo II out of the woodworking shop to take over duties until we decided what to buy next. Given how quiet and powerful the vacuum is compared to the expensive plastic junk on the market, I decided to give the electric floor brush a try for our carpets. While not inexpensive, it exceeded my expectations in terms of power and usefulness. For example, the old upright vacuum was too high to get under low places (like the bed) while this floor brush can fit under tight spaces. The cord is long enough to move around a large room easily (and the Fein Turbo II can be pulled easily by the 16' hose which is firmly attached.) Looks like the next purchase will be another Fein Vacuum for the house so I can get the Turbo II back in the shop!

0 of 0 people found the following review helpful.
High Price is the only Drawback
By J. Zens
Like their vacuums, this Fein floor brush works extremely well. I originally wanted it to clean fine sawdust from the entry mats in my shop, but the price held me back. One day my wife was using the house vacuum to clean entry mats in the garage, using a machine that takes small vacuum bags at about $7.00 a copy. That was enough to push me over the edge and buy this unit, and I am glad I did.It works very well. The sawdust in the shop goes away very quickly - much faster than using Fein's non-motorized floor tools. And in the garage, small stones, grass, and all the other things that get tracked into a garage disappear with the vacuum's strong suction.If you can get over the sticker shock of this item, it does work very well, and I would recommend it.

0 of 0 people found the following review helpful.
BEST FLOOR BRUSH I HAVE USED
By roman fedyk
I have lots of Fein equipment and find it to be of the highest quality. This electric floor brush is no exception. It runs very quietly, has an agressive brush and even picks up on hardwood, which really surprised me. I thought this was only going to work for carpet. On carpet it picked up everything in its way with no complaints. I have the newer model Turbo 1 and this broom works very well with it. I highly recommend this power brush......

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Hitachi CN16SA 16 Gauge Nibbler

Buy Hitachi CN16SA 16 Gauge Nibbler

Hitachi CN16SA 16 Gauge Nibbler Product Description:

• 3.5 Amp motor
• 3-position indexing die holder
• Compact and light 3.7 lbs.
• Cuts 16 gauge steel
• Hitachi exclusive 5 year warranty
• 3.5-Amp motor delivers intense power that cuts through corrugated and flat sheet metal
• Comes with a 5-year limited warranty
• Compact and light 3.7-pounds
• Cuts 16-Gauge mild steel and 18-Gauge stainless

Product Description

Hitachi CN16SA 16-Gauge 3.5-Amp Sheet Metal Nibbler

Customer Reviews

Most helpful customer reviews

7 of 7 people found the following review helpful.
Great Product !
By Contractor
The Hitachi Nibbler is one of the two best purchases I have ever made. Cutting corrugated 26 gauge steel roofing is not fun! The Nibbler makes it easy. A little difficult in the beginning due to figuring out how to make it move up and down on an angle cut, but once that is done it's terrific. I am a contractor and love purchasing tools that save time and turn out a good product.

4 of 4 people found the following review helpful.
The right tool for the job
By R. J. Merzi
If you have ever had to cross cut corrugated or high rib roofing or siding, the type most commonly found on metal buildings, it doesn't take long for you to discover that there is only one tool that does the job smoothly and near effortlessly. Hand shears?..forget it, they just mess up the cut, a Uni-shear?...works OK for straight or curved cuts on a flat panel but it is near useless on the hills and valleys of a corrugated or high rib panel.The right tool for the job is a 16 gauge nibbler and one of the best on the market is the Hitachi CN16SA. The first time I used this tool I couldn't believe how fast and smoothly it cut through the 26 gauge metal.Two features to look for of when purchasing a nibbler, the most important one is the length of the neck, the longer the neck the easier it is to get over the hills and valleys. I found out how important the length of the neck is the hard way. I first bought a Dewalt nibbler, a quality tool with ample power but the neck was too short and it was darn near impossible to get the tool up and over the high crown of the corrugations.The second feature is power, and I discovered this Hitachi CN 16SA is more than adequate when I later cut out some patterns from a 16 gauge sheet of mild steel.I have no problem giving this tool a five star rating.

1 of 1 people found the following review helpful.
great for corrugated metal roofing
By Scott Thomas
I have rented different types of these nibblers several times over the years, never this particular model though. This Hitachi is by far the best I have ever used. It cut our trim and install time by nearly half.

See all 11 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Hitachi NR65AK Round Head 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer

Buy Hitachi NR65AK Round Head 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer

Hitachi NR65AK Round Head 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer Product Description:

• Lightweight 6.2 lbs.
• Rear magazine loading
• Accurate overhanging nail tip
• Sequential firing mechanism ensures precise nail placement
• 30 day satisfaction guarantee and one year warranty on parts and labor
• Adjustable air deflector directs the air exhaust in any direction
• Comes with a 5-year limited warranty
• Lightweight and well-balanced at just 6.4-pounds
• Positive safety allows makes it so the nail is a guide without damaging the collation

Product Description

Hitachi NR65AK 2-1/2-Inch Strap-Tite Strip Nailer with Safety Glasses

Customer Reviews

Most helpful customer reviews

19 of 20 people found the following review helpful.
Super time saver
By A Customer
I am a professional carpenter in California, where extensive use of metal framing connectors is standard practice in both commercial and residential construction. This nailer proved to be worth it's cost purely in time savings. When the cost (to a customer) for a carpenter is roughly $70/hour, time IS money. The nail gun drives one nail only when the nail tip is placed in a hole in a connector, making for accurate framing. The reliability of Hitachi tools is well known, so don't worry about that. The only drawbacks are that it will not fire all nails in the nail strip (jamming reducer), and that it doesn't always drive nails full depth into engineered lumber (heavy beams), although this is more likely a function of the compressor.

9 of 9 people found the following review helpful.
LOVE IT
By frederick haueisen
A VERY LIGHT AND EASY TO USE TOOL, OUR COMPANY HAS 6 OF THESE GUNS AND FIND THEM WORTH HAVING. YOU CAN ALSO SHOOT PASLODE FASTNERS IF THE HITACHI NAIL IS HARD TO FIND IN YOUR AREA. THE HITACHI FASTNER DOES WORK BETTER DUE TO THE STRONGER PAPER STRIP.THE GUN IS LIGHT AND FITS IN TIGHT AREAS, UNLIKE THE PASLODE AND SENCO POSITIVE PLACEMENT GUNS. THE GUN CAN ALSO BE FITTED WITH A SAW HOOK AT THE BACK OF THE MAGAZINE.

2 of 4 people found the following review helpful.
positive placement gun hits the mark
By David Granger
This gun is a great investment if you do any framing on the west coast. It paid for itself in time saved on the first 2 story adition I did. For example: we counted 80 nails needed for Simpson hardware PER TRUSS in the new roof. That is a whole day of using a palm nailer- done in an hour with this gun. It has the power to shoot 2 1/2 inch nails into a paralam beam (Almost all the time) and has very little recoil. It loads easily, and my local lumber yard carries the proper nails. My only complaints are that it is very loud (but no more so than a palm nailer) and won't always fit in tight spaces for hardware like A35s.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!